Chapter 2: System settings
General information
This chapter describes the different menus of the device.
▪ Refer to Setting → Date & Time for time and date settings.
▪ To set the filters, go to Menu → Filter.
▪ To see the manufacturer information, refer to the Setting → About.
▪ Refer to Menu → Rec Setting and Menu → Rec Mode for recording settings.
▪ Refer to Menu → User Settings for settings related to storage, abnormality detection,
and pacemaker detection.
Note
• Before recording, it is better to adjust the device according to your desired conditions.
The Dena 1210 electrocardiograph has a flexible configuration. By default, the Menu is on the
left side of the screen. By changing the display mode to "Full screen" (by touching the option
or its key in the control panel), the Menu section is hidden and the waveforms are drawn
in full screen.
In the Menu, there are Rec Mode, Rec Setting, Filter, User Setting and Patient Info sections,
which can be selected according to the need. Other settings are in the Setting section
following is a description of each of these sections
Figure 2-1 Main menu (full screen)
14
. The