Rear Panel; Side Panel - Saadat DENA 1210 User Manual

Chapter 1: Introduction
Note
• Make sure the battery indicator light is on. If the battery indicator does not light up,
check the local power supply and power cord connection. If this problem persists,
contact after-sales service.
• The battery needs to be charged after transport or storage. If in this case you try to
turn on the device without connecting the power cable, the device cannot be turned
on due to insufficient charge. In this case, connect the device to the mains for a period
of time according to the type of battery (by referring to the technical specifications).
• After working with the battery for a while, the battery needs to be recharged. To do
this, it is enough to connect the device to AC mains.

Rear panel

The following parts are located in the rear panel of the device (Figure 1-6):
Power socket
Equipotential jack (more information described in Patient's safety section)

Side panel

The following connectors are located in the side panel of the device (Figure 1-7):
ECG cable connector
USB connector (data transport & software upgrade)
PC connector
Network (LAN) connector
1
2
Figure 1-6 Rear panel
1
Figure 1-7 Side panel
12
2 3 4