8.10.10.2 X23 Resolver Feedback
The diagram below shows the connection of a resolver (2 to 36-poles) as a feedback system. The thermal control in
the motor is connected via the Resolver cable and evaluated in the drive. If no thermal control is in the motor, the
cable must short pins 8 and 9.
If cable lengths of more than 100m are planned, please contact customer support.
Type
FBx.INDENTIFIED
Resolver
40
*
Resolver Sine/Cosine channels must be high impedance - DC termination switch open.
*
DC termination is not compatible with the REF channel - DC termination switch open.
Description
Accuracy: 14 bit (0.022°), resolution: 16 bit (0.006°), frequency (fixed): 6875 Hz
AKD2G-S Installation Manual, Safety 1
Kollmorgen | kdn.kollmorgen.com | June, 2023
113