Monitoring And Maintenance; Monitoring; Led; Cli Commands - Ruijie RG-AP680-CD Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
5

Monitoring and Maintenance

5.1

Monitoring

5.1.1

LED

You can observe the LEDs to monitor the device in operation.
5.1.2

CLI Commands

You can run related commands on the CLI of the device to remotely monitor the device, including:

Port configuration and status

System logs
Note
 For details about the commands, see the corresponding configuration guide.
 The access point supports remote maintenance.
5.2

Remote Maintenance


If the access point works in the fat mode, you can log in to the access point remotely for maintenance.

If the access point works in the fit mode, you can use a wireless controller to centrally manage and maintain
the access point.
5.3

Hardware Maintenance

If the hardware is faulty, please contact Ruijie technical support.
27
Monitoring and Maintenance