Changing Valve And Pump Hoses - WAGNER IP 5000 Translation Of The Original Operating Manual

EDITION 08/2021

8.2.5 CHANGING VALVE AND PUMP HOSES

Work steps:
1. Switch off the system.
2. Switch off the main switch and protect against unauthorized restarting.
3. Lock the compressed air supply and decompress the system.
To facilitate working on the pump, it is advisable to detach the electrical and
pneumatic connections at the control cabinet and place the complete pump on a
workbench.
4. Loosen the hose clips and remove the powder hoses at the top and bottom of the pump.
5. Remove air lines at the top and bottom of the valve blocks.
6. Turn back connections 1 on the lower flange.
ORDER NUMBER DOC241936
I 0
0
P_00020
1
P_04345
IP 5000
43