Maintenance And Repair; Protective And Monitoring Equipment - WAGNER IP 5000 Translation Of The Original Operating Manual

EDITION 08/2021

4.2.7 MAINTENANCE AND REPAIR

Danger due to improper maintenance and repair!
Danger to life and equipment damage.
Only a WAGNER service center or a specially trained person may carry out repairs and
replace parts.
Repair or replacement of devices or parts of devices are only allowed to be performed
outside the hazard area by qualified personnel.
Use only WAGNER original spare parts and accessories.
WAGNER assumes no liability for changes to the product made by the operating
company without the knowledge of WAGNER. Any adjustments to the documentation
and the market release are the responsibility of the operating company.
Only repair and replace parts that are listed in the Chapters "Accessories" and "Spare Parts"
and that are assigned to the device.
Do not use any defective components.
Before all work on the device and in the event of work interruptions:
– Switch off the energy and compressed air supply.
– Relieve pressure on powder spray gun and device.
– Secure the powder spray gun against actuation.
Observe the operating and service manual for all work.

4.2.8 PROTECTIVE AND MONITORING EQUIPMENT

Danger due to removal of protective and monitoring equipment!
Danger to life and equipment damage.
Protective and monitoring equipment must not be removed, modified or rendered
unusable.
Regularly check for perfect functioning.
If defects are detected on protective and monitoring equipment, the system must
not be operated until these defects are remedied.
ORDER NUMBER DOC241936
IP 5000
16