Technical Data; Power; Performance - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Technical data

12.1

Power

AC model
DC model
12.2

Performance

Range
Accuracy (measured under Reference Conditions similar to IEC 60770-1)
Resolution (measured under Reference Conditions similar to IEC 60770-1)
Temperature compensation
Source
Temperature error
Memory
288
• 100-230 V AC ±15%, 50 / 60 Hz, 36 VA (10W)
• Fuse: 5 x 20 mm, Slow Blow, 0.25A, 250V
• 10-32 V DC, 10W (power consumption is listed at maximum)
• Fuse: 5 x 20 mm, Slow Blow, 1.6A, 125V
• 0.3 to 60 m (1 to 196 ft), dependent on transducer
• Standard operation: ±1 mm (0.04") plus 0.17 % of distance
• ±3 mm (0.12 inch) in combination with an XRS-5 transducer on 4 m (13 ft) range or less
• High accuracy OCM : ±1 mm (0.04"), within 3 m (9.84 ft) range
1)
• Standard operation: 0.1 % of range or 2 mm (0.08"), whichever is greater
• High accuracy OCM : 1 mm (0.04")
1)
Reference operating conditions according to IEC 60770-1
• ambient temperature +15 to +25 °C (+59 to +77 °F)
• humidity 45% to 75% relative humidity
• ambient pressure 860 to 1060 mbar g (86 000 to 106 000 N/m
Range: -40 to +150 °C (-40 to +300 °F)
• Integral transducer sensor
• TS-3 temperature sensor
• Average (integral transducer and TS-3)
• Programmable fixed temperature
Fixed 0.17 % per °C deviation from programmed value
• 512 kB flash EPROM
• 1.5 MB flash for data logging
1)
, within 3 m (9.84 ft) range
2)
Operating Instructions, 04/2021, A5E33329501-AG
12
g)
2
SITRANS LUT400