Level (3.4.1.); Discrete Inputs (3.4.2.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

9.3.4.1

Level (3.4.1.)

Simulates level changes, and activates relays based on the setpoints programmed.
Level Simulation Enable (3.4.1.1.)
Enables/disables level simulation.
Options
Level Value (3.4.1.2.)
Enables/disables level simulation.
Values
Ramp (3.4.1.3.)
Enables/disables ramped simulation.
Options
Ramp Rate (3.4.1.4.)
Sets the rate at which the simulated level will change in a ramp simulation.
Options
Low Calibration Point to High Calibration Point
1)
9.3.4.2

Discrete Inputs (3.4.2.)

Simulates behavior of external contacts connected to a discrete input.
Discrete Input 1 (3.4.2.1.)
Disables simulation of Discrete Input 1, or sets behavior of DI during simulation.
Options
SITRANS LUT400
Operating Instructions, 04/2021, A5E33329501-AG
*
Range: Low Calibration Point to High Calibration Point
Default: 0.000
*
SLOW
* MEDIUM
FAST
* DISABLED
ON
OFF
9.3 Maintenance and Diagnostics (3.)
1% of span
2% of span
4% of span
DI is not simulated
DI is simulated to be ON
DI is simulated to be OFF
Parameter reference (LUI)
DISABLED
ENABLED
DISABLED
ENABLED
per second
1
per second
1
per second
1
263