Fail-Safe Fault Alarm (2.8.8.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

High Temperature Value ON (2.8.7.2.)
Sets the temperature value (defined in ° C) at which the High Temperature Alarm will
activate.
Values
High Temperature Value OFF (2.8.7.3.)
Sets the temperature value (defined in ° C) at which the High Temperature Alarm will de-
activate.
Values
Assigned Relay (2.8.7.4.)
Determines which relay (if any) will be activated when the High Temperature Alarm activates.
Options
Alarm State (2.8.7.5.)
Read only. Used to view the current state of the High Temperature Alarm.
Options
9.2.8.8

Fail-safe Fault Alarm (2.8.8.)

Reported when fault that has caused a fail-safe condition is present.
Enable (2.8.8.1.)
Enables/disables Fail-safe Alarm.
Options
SITRANS LUT400
Operating Instructions, 04/2021, A5E33329501-AG
Range: -273.0 to +273.0 °C (-459.0 to +523.0 °F)
Default: 100.0 °C
Range: -273.0 to +273.0 °C (-459.0 to +523.0 °F)
Default: 100.0 °C
*
ACTIVE
INACTIVE
*
Parameter reference (LUI)
9.2 Setup (2.)
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ENABLED
DISABLED
207