Date And Time (2.14.); Date (2.14.1.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Parameter reference (LUI)
9.2 Setup (2.)
9.2.14

Date and Time (2.14.)

Enter the current date and time using the local push buttons.
Parameter Edit mode displays a string editor.
Using the string editor:
1. Use RIGHT/LEFT arrow to select the character position in the parameter field to be edited.
2. As each character is highlighted (selected), use the UP/DOWN arrow to change the
character.
– Use the DOWN arrow to select a character from the string above the parameter value.
– Use the UP arrow to select a character from the string below the parameter value.
3. To escape without saving your changes, press LEFT arrow continually until ESC is
highlighted. Press LEFT arrow again to escape without saving changes. Otherwise, when
new parameter value is correct, press RIGHT arrow continually until OK is highlighted.
4. Press RIGHT arrow to accept the new value. The LCD returns to parameter view and displays
the new selection. Review for accuracy.
Special Characters:
Character
:
/
-
_
][
9.2.14.1

Date (2.14.1.)

Date is the current date in the format: YYYY-MM-DD.
Values
232
Description Function
colon enters colon in text string
space enters space in text string
slash enters slash in text string
hyphen enters hyphen in text string
underscore enters underscore in text string
'x' in box deletes highlighted character in text string
square brackets inserts space between two characters in text string (limited to one
space between characters)
return arrow key deletes characters (including currently highlighted character) to
end of text string
Range: 1900-01-01 to 2155-12-31
Operating Instructions, 04/2021, A5E33329501-AG
SITRANS LUT400