Siemens SITRANS L 7ML5400 Operating Instructions Manual page 317

SITRANS LUT400
Operating Instructions, 04/2021, A5E33329501-AG
2.8.3.4 ASSIGNED RELAY
2.8.3.5 ALARM STATE
2.8.4 IN-BOUNDS LEVEL ALARM
2.8.4.1 ENABLE
2.8.4.2 HIGH LEVEL VALUE
2.8.4.3 LOW LEVEL VALUE
2.8.4.4 ASSIGNED RELAY
2.8.4.5 ALARM STATE
2.8.5 OUT-OF-BOUNDS LEVEL ALARM
2.8.5.1 ENABLE
2.8.5.2 HIGH LEVEL VALUE
2.8.5.3 LOW LEVEL VALUE
2.8.5.4 ASSIGNED RELAY
2.8.5.5 ALARM STATE
2.8.6 LOW TEMPERATURE ALARM
2.8.6.1 ENABLE
2.8.6.2 LOW TEMPERATURE VALUE ON
2.8.6.3 LOW TEMPERATURE VALUE OFF
2.8.6.4 ASSIGNED RELAY
2.8.6.5 ALARM STATE
2.8.7 HIGH TEMPERATURE ALARM
2.8.7.1 ENABLE
2.8.7.2 HIGH TEMPERATURE VALUE ON
2.8.7.3 HIGH TEMPERATURE VALUE OFF
2.8.7.4 ASSIGNED RELAY
2.8.7.5 ALARM STATE
2.8.8 FAIL-SAFE FAULT ALARM
2.8.8.1 ENABLE
2.8.8.2 ASSIGNED RELAY
2.8.8.3 ALARM STATE
2.8.9 HIGH FLOWRATE ALARM (LUT440 only)
2.8.9.1 ENABLE
2.8.9.2 HIGH FLOWRATE VALUE ON
2.8.9.3 HIGH FLOWRATE VALUE OFF
2.8.9.4 ASSIGNED RELAY
2.8.9.5 ALARM STATE
2.8.10 LOW FLOWRATE ALARM (LUT440 only)
2.8.10.1 ENABLE
2.8.10.2 LOW FLOWRATE VALUE ON
2.8.10.3 LOW FLOWRATE VALUE OFF
2.8.10.4 ASSIGNED RELAY
2.8.10.5 ALARM STATE
2.8.11 RELAY LOGIC
2.8.11.1 RELAY 1 LOGIC
2.8.11.2 RELAY 2 LOGIC
LCD menu structure
317