Sensor Mode Secondary (2.1.4.); Sensor Mode Secondary (2.1.5.); Transducer (2.1.6.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Parameter reference (LUI)
9.2 Setup (2.)
①
②
③
④
⑤
⑥
⑦
⑧
9.2.1.4

Sensor Mode Secondary (2.1.4.)

Menu number 2.1.4. visible on LUT420 (Level model).
OR
9.2.1.5

Sensor Mode Secondary (2.1.5.)

Menu number 2.1.5. visible on LUT430 (Pump and Flow model), and LUT440 (OCM model).
Sets the secondary measurement type to be used in the application.
See Sensor Mode (2.1.3.) (Page 173) for illustration.
9.2.1.6

Transducer (2.1.6.)

Specifies the Siemens transducer connected to the device.
Options
174
Sensor reference point
High calibration point
Low calibration point
Far range
Zero head
Head
Material surface
Maximum head
* NO TRANSDUCER
XRS-5
XPS-10
XPS-15
XCT-8
XCT-12
Operating Instructions, 04/2021, A5E33329501-AG
SITRANS LUT400