Low Temperature Alarm (2.8.6.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

High Level Value (2.8.5.2.)
Sets the upper level value for range outside of which the Out-of-bounds Level Alarm will
activate.
Values
Low Level Value (2.8.5.3.)
Sets the lower level value for range outside of which the Out-of-bounds Level Alarm will
activate.
Values
Assigned Relay (2.8.5.4.)
Determines which relay (if any) will be activated when the Out-of-bounds Level Alarm
activates.
Options
Alarm State (2.8.5.5.)
Read only. Used to view the current state of the Out-of-bounds Level Alarm.
Options
9.2.8.6

Low Temperature Alarm (2.8.6.)

Reported when process temperature is within a user-defined range (see Low Temperature
Value ON (2.8.6.2.) (Page 206) or Low Temperature Value OFF (2.8.6.3.) (Page 206)).
Enable (2.8.6.1.)
Enables/disables Low Temperature Alarm.
Options
SITRANS LUT400
Operating Instructions, 04/2021, A5E33329501-AG
Range: 0.000 to 99999.000
Default: 0.000
Range: 0.000 to 99999.000
Default: 0.000
*
ACTIVE
INACTIVE
*
Parameter reference (LUI)
9.2 Setup (2.)
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ENABLED
DISABLED
205