Out-Of-Bounds Level Alarm (2.8.5.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Parameter reference (LUI)
9.2 Setup (2.)
High Level Value (2.8.4.2.)
Sets the upper level value for range within which the In-bounds Level Alarm will activate.
Values
Low Level Value (2.8.4.3.)
Sets the lower level value for range within which the In-bounds Level Alarm will activate.
Values
Assigned Relay (2.8.4.4.)
Determines which relay (if any) will be activated when the In-bounds Level Alarm activates.
Options
Alarm State (2.8.4.5.)
Read only. Used to view the current state of the In-bounds Level Alarm.
Options
9.2.8.5

Out-of-bounds Level Alarm (2.8.5.)

Reported when material level is outside a user-defined range (see High Level Value (2.8.5.2.)
(Page 205) or Low Level Value (2.8.5.3.) (Page 205)).
Enable (2.8.5.1.)
Enables/disables Out-of-bounds Level Alarm.
Options
204
Range: 0.000 to 99999.000
Default: 0.000
Range: 0.000 to 99999.000
Default: 0.000
*
ACTIVE
INACTIVE
*
Operating Instructions, 04/2021, A5E33329501-AG
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ENABLED
DISABLED
SITRANS LUT400