Revision history
Date
12-Oct-2016
20/21
Table 5. Document revision history (continued)
Revision
ADC:
–
–
IWDG:
–
–
2
Modified:
– Document structure
– Cover page and
– GPIO:
– SPI:
Removed:
– Appendix A (package marking drawings are now
DocID026423 Rev 2
Changes
Section 2.6.1: Overrun flag not set if EOC reset
coincides with new conversion end
Section 2.6.2: ADEN bit cannot be set immediately
after the ADC calibration
Section 2.7.1: RVU, PVU and WVU flags are not reset
in STOP mode
Section 2.7.2: RVU, PVU and WVU flags are not reset
with low-frequency APB
Table 3
Section 2.2.1: Extra consumption on GPIOs
PB0..1 on 20/25/28-pin devices
Section 2.4.7: Packing mode limitation at
reception
available in the data sheet)
STM32F038x6
organization
Need help?
Do you have a question about the STM32F038 6 Series and is the answer not in the manual?
Questions and answers