Advertisement
3)
STRUCTURE 3
340
300
310
311
308
307
305
306
300 Planetary housing
304 O-ring
306 Sealing ring
307 Screw plug
308 Sealing ring
310 Adjusting screw
311 Slotted nut
312 Hexagon socket screw
4)
OPERATION
Both sides of the housing are supported by the frame and the center is mounted on the
transmission case through propeller shaft.
The mast is installed on the front of the drive axle housing. The final deceleration and differential
device built in the housing guarantee accurate rotation and smooth operation.
The power from the transmission in transferred through the hypoid pinion, hypoid gear, differential
case, the pinion of the differential device and the side gear to the drive axle shaft by the side gear
spline and to the hub and wheel mounted on the shaft by high tension bolts.
322
329
324
312
314 Sun gear
316 Circlip
320 Thrust ring
322 Planetary gear
324 Thrust washer
329 Needle bearing
331 Planetary pin
333 Locking pin
333
324
331
320
314
316
304
3-44
338
337
335 Ring gear
336 Ring gear carrier
337 Retainer
338 Hexagon socket screw
340 O-ring
336
335
100D7DR04
Advertisement
