Advertisement
⑨
Change all seals and mount the parts of the brake in other way round order. By mounting the
piston, the sliding and sealing surfaces must be greased lightly using lubricating grease to DIN
51825. The dust protection cap is fitted with a vulcanized-in steel ring which is used to press it
through the locating hole. For exchanging, "lever out" the ring using a suitable tool. The new
dust protection cap must be pressed in with the aid of a suitable mounting ring and screw clamps
or a lever press.
(
(
2)
General
Any discovered defects or damage to parts not listed here must naturally be repaired or replaced
using original parts.
For any other information not contained in these instructions or for more detailed instructions,
please contact Hyundai dealer.
4-19
Advertisement
