(5)
Transmission and axle cooling piping
①
Disconnect cooling hose and connector
from the transmission.
※
Make sure that the coolant has been
drained from the line.
②
Disconnect axle cooling hose and
connector from the axle.
※
Make sure that the axle cooling oil has
been drained from the line.
(6)
Flexible plate
①
Remove the cover on the top face of the
torque converter housing then remove
the 8 mounting bolts installed to the
engine flywheel.
To rotate the flywheel, remove 1
mounting bolt, then insert a turning tool in
the mounting hole. One man must turn
the engine fan by hand while the other
turns the flywheel.
(7)
Mounting bolts holding to flywheel
housing
①
Remove the transmission assembly from
the torque converter housing by loosen-
ing the mounting bolts and socket bolts.
Transmission
assembly
OUT
IN
Axle
cooling
oil tank
Cooling hose
Drive
axle
Transmission
Cover
Bolt
2-10
Radiator
assembly
Cooling
hose
Radiator
assy
OUT
IN
Engine
Flexible plate
Bolt
Engine
Socket bolt
Transmission
110D7ERE10
Pump
110D7ERE22
100D7RE11
100D7RE12