(5)
Engine mounting bracket
Attach a crane to the engine hook and
raise, then remove mounting bolts. Raise
the engine slightly, slide towards the
radiator, then lift up.
※
When sliding the engine, be careful of the
collision of engine and radiator.
2
2
)
INSTALLATION
Installation is the reverse order to removal,
but be careful of the following points.
(1)
Tighten the engine mounting bolts and
nuts.
(2)
Tighten the engine mounting bracket
bolts.
※
Do not remove the bolts unless necess-
ary. Loctite is coated over the threads of
bolt. So, once the bolts were removed,
coat them with loctite(#277) when
installing.
※
Before installing the bolts, loctite in the
holes should be removed by a tap
(3)
Tightening torque of mounting bolt
installed to torque converter housing.
·See page 2-12, 2
2
(
(
4)
Radiator hoses
·Distance to insert hose : 55mm(2.2in)
(5)
Air cleaner hose
①
Insert the air cleaner hose securely and
fit a clamp.
②
②
Distance to insert hose
·Air cleaner hose : 40.4mm(1.6in)
·Engine end : 28.8mm(1.1in)
)INSTALLATION.
Bolt
Mounting bolt
85~115 kgf m
(614~832 lbf ft)
Mounting bolt
.
50~66 kgf m
(361~477 lbf ft)
Air
cleaner
Engine
Radiator
hose
2-15
Rubber mount
.
.
.
Loctite #277
Muffler
Radiator
hose
Radiator
Bolt
110D7ERE93
110D7ERE94
110D7ERE95