Advertisement
6)
DISASSEMBLY & ASSEMBLY
(1)
Replacing complete working section
Loosen tightening two bolts with 17mm
spanner.
Taking out working section one by one.
Remove O-rings on the surface of working
section properly.
Pay special attention not to give any
scratch on the surface.
Prepare two sizes of O-rings.
And fix the O-rings on the right positions
with some grease in order to avoid
separation from the surface while moving.
6-47
100D7MCV01
100D7MCV02
100D7MCV03
100D7MCV04
Advertisement
