Advertisement
5)
MAINTENANCE AND REPAIR WORK
(1)
Maintenance and exchange of brake pads
The brake pads themselves are maintenance free. All that is required here is a check for
damaged parts, as well as inspection to ensure that the brake disk remains easy running.
The thickness of the brake lining must be subjected to a visual inspection at regular intervals,
which depend on vehicle usage, but every six months at the latest. In the event of a minimal
residual lining thickness, these intervals must be reduced accordingly in order to avoid major
damage to the brake or disk.
Min. residual thickness 1.0mm per lining pad(6mm carrier plate thickness).
1
Piston
2
Adjusting screw
3
Lock nut
4
Thrust bolt
※
Only original spare lining plates may be used. If any other spare parts are used, no warranty
claims will be accepted either for the brakes or their functional characteristics.
①
Stand the vehicle on an even surface and secure against rolling away.
②
Release the parking brake by applying the required release pressure.
③
Release the screw cap and unscrew.
④
Release the lock nut(size 24 or 30) and turn the adjusting screw with socket wrench size 8 or 10
manually clockwise until it lies flush with the inside of the piston.
⑤
Press back the thrust bolt using a suitable screwdriver until it has contact with the piston.
2
S1
4
P
3
S
S
S1 Screwdriver
P
4-16
1
2
Socket wrench
Inside of the piston
100D7BS113
Advertisement
