Advertisement
(5)
Assembly of the piston
Lubricate cylinder bore, apply the thread holes at wet disk brakes of dimension X270 and X340
with Loctite 243, at wet disk brakes of dimension X460 and X650 with Loctite 262 and install and
screw the bushing(if present). Place the piston onto the brake carrier(do not cant it).
※
Wet disk brakes of dimension X270 and X340
Press the piston equal by hand into the brake carrier(do not cant it).
※
Wet disk brakes of dimension X460 abd X650
Press the piston equal with mounting screws into the brake carrier(do not cant it).
If necessary adjust the piston with easy hammer taps to the thread holes. Install first the spring,
then the tubes in the bore holes of the piston. Screw in the hexagon head screws with flange.
3-145
100D7XL86
Advertisement
