Advertisement
2
2
)
DO AEB WORK
(1)
Start engine after parking the machine on flat floor and blocking wheels.
(2)
Release parking brake.
(3)
With stepping on the service brake, operate T/M STALL(3 stage).
(To avoid defect of clutch pack, repeat 10 sec of operation and 10 sec of placing neutral)
(4)
When the T/M oil temperature reaches
neutral position to keep the machine at LOW RPM.
(5)
Connect the AEB STARTER to T/M controller.
(6)
Push AEB STARTER over 3 seconds.
(7)
Confirm the status of AEB from the DISPLAY.
·
Normal operation shows "ST, KR, KV, K1, K2, K3" orderly for 3~5minutes.
·
After the succesful completion, it displays "OK".
·
With a new controller, it may display "F6" error code before AEB, it will disappear.
(8)
In case of abnormal running, it may display "STOP" with the appropriate error code.
(9)
After truobleshooting, start the machine again to repeat above.
※
As the STALL operation has to be done, the SERVICE BRAKE must be locked perfectly to avoid
the fatal accident.
※
AEB mode : It controls the disc internal of the transmission, automatically.
75~80° C, lock the parking brake and then shift gear to
7-28
Advertisement
