Advertisement
(5)
Assembly of planetary gear
①
Prepare planetary gear :
Install the needle bearing(10, 11) into the
planetary gear(12, 13).
②
Insert the preassembled planetary gears
(12, 13) with needle bearings (10, 11),
rings(16) (if present) and thrust disks (14
, 15) into the planetary housing (22, 23)
(planetary housing in horizontal position).
③
Place O-ring(19) into the slot of the
planetary housing(22). Because of the
difference of diameter of 0.1mm press the
planetary pin(17, 18) in direction of arrow.
Be sure, that the bore hole of the locking
pin in the planetary pin and planetary
housing are aligned. After inserting,
secure the planetary pin with the locking
pin(20, 21).
3-139
100D7XL63
100D7XL64
100D7XL65
Advertisement
