Advertisement
②
②
Engine cover(center)
a.
Pull upside the precleaner by loosening
the clamp and seal in the air intake hole
of air cleaner.
b.
Remove engine cover and radiator
cover upward.
(2)
Torque converter housing cover and
mounting bolts. See page 2-12.
(3)
Engine accessory
Remove all wiring harnesses, cables and
hoses around the engine, dashboard and
frame.
①
Wiring harness to alternator and starter.
②
Wiring harness for oil pressure and
engine water temperature gauges.
③
Cables for meters, buttons and
accelerator pedal.
④
Hoses to fuel tank and air cleaner.
⑤
Exhaust pipe.
(4)
Radiator hose
Open the drain valve of the radiator and
drain the cooling water, then remove the
radiator hose.
Precleaner
Clamp
Transmission
2-14
Radiator cover
Engine cover
Engine
Flexible plate
Cover
Bolt
Engine assembly
110D7ERE18
100D7RE11
110D7ERE19
Advertisement
