Airanger Dpl Plus Features - Siemens airanger DPL PLUS Instruction Manual

The AiRanger DPL Plus is typically used to monitor material level in open or closed
vessels but can be used in almost any process which requires a distance measurement
(within the system range).
Refer to Technical Reference Application Examples on page 96 for detailed descriptions
of some configuration examples to which the AiRanger DPL Plus may be applied. If
process or equipment position monitoring at distances greater than 60 m (200 ft) is
required, refer to Example - 6, Tripper Measurement.

AiRanger DPL Plus Features

• Enclosure:
• Backlit LCD:
• Programmer:
• Scanning:
• Communications:
• Dolphin Compatible Communications
• Speed:
• Reliability:
1.
Windows is a registered trademark of Microsoft Corporation.
7ML19981BD02
Chemical resistant, light weight, dust tight, liquid tight,
easy to work with.
Large digits for Reading and programming value displays.
Illuminated LCD insures readability under all lighting
conditions. Includes custom Graphic Symbols for continuous
indication of operating conditions.
20 tactile feedback keys for easy access to programming
and operating functions. Magnetic mounting and infrared
interface permit removal on programming completion.
Substantially reduces equipment costs for an additional
vessel (present or future).
SmartLinx Compatible
Communications ready when equipped with an appropriate
Milltronics SmartLinx module.
Dolphin Plus is Windows
connected to the unit via the RG-11 port or remote connection
through the RS-232 or RS-485 port. The software provides an
easy means for programming, uploading,or downloading
parameters.
16/32 bit microprocessor at 16.7 MHz clock speed. 1 vessel
(point) per second scanning speed capability.
Sonic Intelligence ensures all measurements are accurate
and reliable. Immune to power interruptions. All programming
is stored indefinitely. Dynamic operating data is retained for
one hour and updated immediately onpower resumption.
AiRanger DPL Plus – INSTRUCTION MANUAL
®1
-compatible configuration software
Page 3