Features Fct010 - Siemens SITRANS F MASS 2100 Operating Instructions Manual

Note
Approval identifications
Approval certificates and notified body identifications are available for download at
www.siemens.com (http://www.siemens.com/processinstrumentation/certificates).
3.6

Features FCT010

• The SITRANS FCT010 can be used as Modbus slave in stand-alone or parallel operation on
Modbus or third party automation systems
• Compact sensor design
• High immunity against process noise
• Fast response to step changes in flow
• High update rate (100 Hz) on all process values
• Measurement of:
– Mass flow
– Volume flow
– Density
– Medium temperature
• Independent low flow cut-off settings for massflow and volumeflow
• Automatic zero-point adjustment (initiated by host system)
• Process noise damping using digital signal processing (DSP).
• One totalizer for summation of massflow. The totalizer is reset on loss of power.
• Empty pipe monitoring
• Simulation of process values:
– Mass flow
– Volume flow
– Density
– Medium temperature
• Troubleshooting and sensor checking
• Use in hazardous areas according to specification
• Intelligent filtering system for aerated flow
• Unit selection of process values and totalizer
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB
Description
3.6 Features FCT010
25