Features Of Oxymat 7 - Siemens SIPROCESS GA700 Operating Instructions Manual

Description

3.6 Features of OXYMAT 7

1958, 1978, 1998, 2018
1959, 1979, 1999, 2019
1960, 1980, 2000, 2020
1961, 1981, 2001, 2021
1962, 1982, 2002, 2022
1963, 1983, 2003, 2023
1964, 1984, 2004, 2024
1965, 1985, 2005, 2025
1966, 1986, 2006, 2026
1967, 1987, 2007, 2027
1968, 1988, 2008, 2028
1969, 1989, 2009, 2029
1) In conformance with DIN EN 60062
The identifier of the manufacturing location (e.g. N1) is added as a prefix to the actual serial
2)
number
3.6 Features of OXYMAT 7
• Depending on the reference gas, the physical zero point can be set between 0% and 100%
oxygen
• Measuring range identification
• Electrically isolated analog output 0 / 4 to 20 mA (also inverted)
• Storage of measured values possible during calibration. The measured value is held at the
analog output at the value present when calibration was commenced.
• Short response time
• Low long-term drift
• Internal pressure sensor for correction of pressure variations in sample gas in the range from
500 to 2 500 hPa (absolute)
• Monitoring of sample gas and reference gas (option)
• Smallest measuring spans (up to 0.5% O
• Vibration compensation as option
• Suitable for use with corrosive sample gases
• Hardware adapted to application
22
K September
L October
M November
N December
P
R
S
T
U
V
W
X
) possible
2
Operating Instructions, 05/2022, A5E35640463-07
9
O
N
D
Field device