Agency Listings, Approvals; Underwriters Laboratories (Ul/Ulc); Requirements For All Installations; Requirements For Local Protected Fire Alarm Systems - Maple Armor FW106 Installation And Operation Manual

Fire alarm control panel
Table of Contents

Advertisement

Installation and Operation Manual                                                                                                 
 
Agency Listings, Approvals 
Underwriters Laboratories (UL/ULC) 
Requirements for All Installations 
The general requirements are described in this section. When installing an individual device, refer to the specific 
section of the manual for additional requirements. 
1. All field wiring must be installed in accordance with NFPA 70 National Electric Code, CSA C22.1 Canadian 
Electrical Code Part 1, CAN/ULC‐S524, NBC, NBC, NFC, AHJ, and local code requirements. 
2. Use the addressable smoke detectors listed in the compatibility chart (Appendix‐A: Compatible Devices). 
3. Use UL/ULC listed notification appliances compatible with the FW106/FW106C from those specified in 
Appendix‐A: Compatible Devices of this manual. 
4. A full system verification must be performed every time the panel is programmed or reprogrammed. 
Requirements for Local Protected Fire Alarm Systems 
At least one UL listed supervised notification appliances must be used. 
 
 
 
 
 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fw106c

Table of Contents