Installation and Operation Manual
Refer to Table 7 for trouble event types and explanation of the events.
Category
System
Unit
Circuit
Table 7 Trouble Event Type
Trouble Event Type
PrimaryPower_Loss
Battery_Loss
ControlPanel_Grounding
PrimaryPower_OverVoltage
Charger_OverVoltage
ArchiveFile_Missing
ConfigFile_Missing
ConfigFile_Damaged
ALU_Conf.Mismatch
AMI_Jumper
Unit_Missing
Ext._Missing
Unit_Addr.Conflict
Unit_ Illegal
Unit_SwitchError
Ext._Illegal
Ext._Grounding
Ext.__Addr.Conflict
Bus_Short
Explanation
Primary power is lost
Battery is lost
Control panel detects ground condition
Primary power voltage is too high
Charger voltage is too high
History record file is missing
Configuration file is missing
Configuration file is damaged
ALU's configuration file is mismatched with
AMI's
AMI has a jumper shorted
PCU/ALU/NOU/ROU/XNU is missing
The network annunciator is missing
1. Two or more ALUs have the same
addresses, or
2. Two NOUs have the same addresses
The unit is working, but it is not configured
The unit address changed during running
The network annunciator is working, but it is
not configured
The network circuit is grounded
Two or more annunciators on the network
circuit have the same address
The addressable loop circuit is shorted
40