Table of Contents
Advertisement
Installation and Operation Manual
Operation
Status handling
This section describes the control panel responses and operation in standby condition, alarm condition, trouble
condition, and supervisory condition.
Standby Condition
In normal standby operation, the green AC ON LED should be the only illuminated LED. The LCD will show the
system label and the current time.
2017-05-18 18:47:23
Normal
Acknowledge
Alarm Conditions
When the system detects an alarm condition, the system alarm LED activates (ON – flashing) and the buzzer
activates (ON – alarm pattern). Local audible and visual signals along with remote alarm signals operate, and the
LCD panel indicates the zone or point initiating the alarm. The LCD is similar to the Trouble conditions shown in
Figure 31.
When an alarm is received, proceed in accordance with the established emergency plan. Make sure all
personnel is accounted for and notify the Fire Department.
FireWatcher
Project:xxx
Buzzer
reset
Silence
Figure 30 LCD (Standby)
38
Manual
Menu
Alarm
Time & Date
Product Name
&
Project Name
Functionality
Buttons
Advertisement
Table of Contents
