Table of Contents
Advertisement
Installation and Operation Manual
Dangerous voltages will be present on the terminal block and on other components surrounding it
when the AC supply is turned on. Do not touch.
CAUTION
AC Input terminals must be located on the left side of the enclosure and in the knockouts position shown in
Figure 18.
Route all high voltage and non‐power limited wiring together and away from power limited
wiring. Refer to the Power Limiting section for more details.
Connect the ground cable to the earth stud on the enclosure back box.
Figure 18 AC Power Supply Wiring
Figure 19 Ground Wiring
25
Advertisement
Table of Contents
