Installation and Operation Manual
LED, Buzzer, Buttons
The FW106/FW106C has a buzzer, 9 LEDs, 5 navigational buttons and enter button, 6functionality buttons.
LEDs Operation
Refer to Table 8 for the LEDs operation.
ALARM
SUPERVISORY
TROUBLE
OTHER SIGNALS
POWER ON
Table 8 LEDs Operation
Steady ON
OFF
Red
Flashing
Steady ON
OFF
Yellow
Flashing
Steady ON
OFF
Yellow
Flashing
Steady ON
OFF
Yellow
Flashing
Green
Steady ON
Indicates that there are alarm events and all
alarm events have been acknowledged.
Indicates that there is no alarm event in the
system.
Indicates that there are alarm events in the
system, but some of them have not been
acknowledged.
Indicates that there are supervisory events
and all of them have been acknowledged.
Indicates that there is no supervisory event in
the system.
Indicates that there are supervisory events in
the system, but some of them have not been
acknowledged.
Indicates that there are trouble events and all
of them have been acknowledged.
Indicates that there is no trouble event in the
system.
Indicates that there are trouble events in the
system, but some of them have not been
acknowledged.
Indicates that there are other signal events
and all of them have been acknowledged.
Indicates that there is no other signal event in
the system.
Indicates that there are other signal events in
the system, but some of them have not been
acknowledged.
On control Panel:
Indicates that the system's main power works
normally.
47