Connecting To Other Devices Via Lan; Connecting Using Wireless Lan Access Point Mode - Sony PXW-Z280T Operating Instructions Manual

Connecting to Other
Devices via LAN
The camcorder can connect to smartphones,
tablets, and other devices using via LAN
connection.
Making a LAN connection between a device and
the camcorder enables you to do the following
using the web remote control (page 68) or
"Content Browser Mobile" application.
• Sending planning metadata (page 49)
Send and receive planning metadata using the
device and camcorder.
You can send planning metadata created
beforehand to the camcorder to specify clip
names.
• Remote operation via LAN
You can control the camcorder from a
smartphone, tablet, or computer that is
connected to the camcorder via a LAN.
• File transferring via LAN
You can transfer a proxy file (low resolution)
that is recorded on an SD card in the camcorder
or original file (high resolution) that is recorded
by the camcorder to the server via a LAN.
• Video monitoring via LAN
You can create a stream (H.264) from the
camera or playback video of the camcorder, and
monitor the video using the "Content Browser
Mobile" application from a device via a LAN.
"Content Browser Mobile" application
You can operate the camcorder remotely on the
device screen while streaming from the
camcorder, and configure settings of the
camcorder, using the "Content Browser Mobile"
application.
For details about the "Content Browser Mobile"
application, contact your Sony sales or service
representative.
Streaming high quality video using Sony QoS
technology (page 66)
You can stream high quality video using a Sony
Network RX Station (sold separately) or
XDCAM air* Connection Control Manager
(CCM) connected with the camcorder in network
client mode.
* XDCAM air is a cloud service that is provided by
Sony.
To use this service, registration is required.
XDCAM air is not provided in some regions. For
details on areas where the service is provided, refer to
the following site.
https://www.xdcam-air.com
For more details, contact a Sony professional sales
representative.
Connecting using wireless LAN
access point mode
The camcorder works as an access point, and
connects to a device via a wireless LAN.
Smartphone/
tablet
Connecting to an NFC-compatible device
with one-touch operation
Devices that support NFC can be connected (one-
touch connection) using NFC.
1
Open [Settings] on the device, select
[More], and place a check mark in the
[NFC] checkbox.
2
Turn the camcorder on.
54
Computer