Table of Contents
Advertisement
4. Specifications
4.5 Tape - Scotch® pressure-sensitive film box sealing tapes.
4.6 Tape Width
50mm [2 inches] minimum to 72mm [3 inches] maximum.
4.7 Tape Roll Diameter
Up to 405mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.8 Tape Width - Standard
70mm ± 6 mm [2.75 inch ± 0.25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ± 0.25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")
4.9 Box Board
Style – regular slotted containers – RSC.
125 to 275 P.S.I. bursting test, single wall or double wall B or C flute.
23-44 lbs. per inch of width Edge Crush Test (ECT).
4.10
Minimum 6" [152]
Maximum N/A
3M-Matic
7000r-I / 7000r3-I Pro - Type 11700
™
Page 15
44-0009-2165-8 / ECO# 0078045
(continued)
Box Weight and Size Capacities
A. Box Weight, filled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support flaps.
B. Box Dimensions for 7000r-I/7000r3-I Pro Machines: Inches [mm]
* Boxes narrower than 8 inches [200mm] may require more frequent belt replacement
because of limited contact area.
To accommodate smaller or larger boxes, machine upper taping head frame and/
or outer column assemblies can be repositioned as described in "Special Set-Up
Procedure" section of this manual. Refer to illustration/chart for box height range
possibilities by adjusting machine upper frame and/or outer column positioning.
Length
Width
6.5" [165]*
26" [660]
A Standard Pos. B Fully Raised Pos. C Lowered Pos.
AG 3 Tape Leg
(i.e. 2.75" [70])
4.5" [115]
26" [660]
Original Instructions
Source Document for all related Manuals/Translations
film tapes)
®
Tape Leg 2" [50]
(AG3/no bumper)
12.5" [317]
2.25" [57]
36" [914]
25.5" [647]
International - ENG
February 2021
Advertisement
Chapters
Table of Contents
