Tape; Tape Width; Tape Roll Diameter; Tape Application Leg Length - Standard - 3M Matic 7000a Instructions And Parts List

4-SPECIFICATIONS (continued)

4.6 Tape

Scotch ® pressure-sensitive f lm box sealing tapes.

4.7 Tape Width

50mm [2 inch] minimum to 72mm [3 inch] maximum

4.8 Tape Roll Diameter

Up to 406.4mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.9 Tape Application Leg Length – Standard
70mm ± 6mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")

4.10 Box Board

Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C f ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)

4.11 Box Weight and Size Capacities

A. Box Weight, f lled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support f aps.
B. Box Dimensions for 7000a Pro and 7000a3 Pro Machines: Inches [mm]
Length Width
Minimum 6" [152] 6 1/2" [165]* 4 3/8" [111]
Maximum N/A 26"
* Boxes narrower than 8 inches [200mm] may require more frequent belt replacement because of limited
contact
To accommodate smaller or larger boxes, machine upper taping head frame and/or outer column assemblies
can be repositioned as described in "Special Set-Up Procedure" section of this manual. Refer to illustration/chart
for box height range possibilities by adjusting machine upper frame and/or outer column positioning.
7000a-7000a3 Pro - NA
A Standard Pos. B TBA
AG 3 Tape Leg
(i.e. 2 3/4" [70])
[660] 28" [711]
f lm tapes.)
®
C Alternate Pos. D Fully Raised Pos.
AG 3 Short Tape Leg LHB Tape Leg
(i.e. 2.0" [50]) (i.e. 1 3/8" [35])
3 3/4" [95] 1 1/2" [38]
27 1/2" [698] 25 1/4" [641]
13
12 1/4" [311]
36" [914]
(continued on next page)
2014 June