Set-Up Recommendations; Tape; Tape Width; Tape Roll Diameter - 3M -Matic 7000a Pro Instructions And Parts List

4. Speci cations

4.5 Set-Up Recommendations:

• Machine must be level.
• Customer supplied optional infeed and exit conveyors (if used) should provide
• Optional exit conveyor (powered or gravity) can help move sealed boxes away from

4.6 Tape

4.7 Tape Width

4.8 Tape Roll Diameter

4.9 Tape Application Leg Length – Standard
70mm ± 6mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")

4.10 Box Board

Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)

4.11 Box Weight and Size Capacities

Minimum 6" [152] 6 1/2" [165]* 4 1/2" [114]
Maximum N/A
* Boxes narrower than 8 inches [200mm] may require more frequent belt replacement
because of limited contact area.
To accommodate smaller or larger boxes, machine upper taping head frame and/or outer
column assemblies can be repositioned as described in "Special Set-Up Procedure"
section of this manual. Refer to illustration/chart for box height range possibilities by
adjusting machine upper frame and/or outer column positioning.
3M-Matic ™ 7000a-7000a3 Pro
Page 14
(continued)
straight and level box entry/exit.
machine.
Scotch® pressure-sensitive lm box sealing tapes.
50mm [2 inch] minimum to 72mm [3 inch] maximum
Up to 406.4mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
A. Box Weight, lled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support aps.
B. Box Dimensions for 7000a Pro and 7000a3 Pro Machines: Inches [mm]
Length Width
26" [660]
® lm tapes.)
A Standard Pos. B Alternate Pos.
AG 3 Tape Leg AG 3 Short T
(i.e. 2 3/4" [70]) (i.e. 2.0" [50])
1 1/2" [38]
28" [711] 25"
C Fully Raised Pos.
LHB Tape Leg
(i.e. 1 3/8" [35])
12 1/4" [311]
[635] 35 1/2" [601]
NA - ENG
March 2017