Tape; Tape Width; Tape Roll Diameter; Tape Application Leg Length - Standard - 3M -MATIC 8000a-T Instructions Manual

4-SPECIFICATIONS (continued)

4.6 Tape

Scotch ® pressure-sensitive fi lm box sealing tapes.

4.7 Tape Width

50mm [2 inch] minimum to 72mm [3 inch] maximum

4.8 Tape Roll Diameter

Up to 406.4mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.9 Tape Application Leg Length – Standard
70mm ± 6mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")

4.10 Box Board

Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C fl ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)

4.11 Box Weight and Size Capacities

A. Box Weight, fi lled: 5 lbs. – 85 lbs. [2.3 kg – 38.6 kg]. Contents must support fl aps.
B. Box Dimensions for 8000a and 8000a3 Machines: Inches [mm]
Length
Mínimum 6" [152]
Máximum
To accommodate smaller or larger boxes, machine upper taping head frame and/or outer column assemblies
can be repositioned as described in "Special Set-Up Procedure" section of this manual. Refer to illustration/chart
for box height range possibilities by adjusting machine upper frame and/or outer column positioning.
8000a-8000a3 - NA
8000a Width 8000a3 Width AG 3 Tape Leg
4 1/2" [114] 5 1/2" [140]
21 1/2" [546]
N/A
®
fi lm tapes.)
A Standard Pos. B Fully Raised Pos.
(i.e. 2 3/4" [70])
4 1/4" [108]
21 1/2" [546]
13
12 1/4" [311]
36" [914]
2014 June