Machine Noise Levels; Set-Up Recommendations; Tape; Tape Width - 3M -Matic 7000a-I Instructions And Parts List

4. Specifications
4.4 Machine Noise Level (measured at workplace):
Weighted emission sound pressure level/workplace
Uncertainty
A-Weighted sound power level
Uncertainty
Hearing Protection Recommended
Note: Noise levels will vary and are dependent on the pressure sensitive tape used inthe
application. The sum of measured value of noise plus its associated uncertainty represents an upper
limit of range of values. Idling refers to machine running in rest position (no boxes). Under Load
refers to machine running and box taping using adhesive tape 3M-Scotch 75mm (3") Accuglide -
Bottom Taping Head.
4.5 Set-Up Recommendations:
• Machine must be level.
• Observe Center of Gravity when lifting and moving machine.
• Avoid floor with greater than 10 degree slope.
• Customer supplied optional infeed and exit conveyors (if used) should provide straight and
level box entry/exit.
• Optional exit conveyor (powered or gravity) can help move sealed boxes away from machine.
Powered exit conveyor should match belt speed of case sealer.
4.6 Tape - Scotch® pressure-sensitive film box sealing tapes.
4.7 Tape Width - 50mm [2 inch] minimum to 72mm [3 inch] maximum.

4.8 Tape Roll Diameter

Up to 406.4mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.9 Tape Application Leg Length – Standard
70mm ± 6mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")
4.10

Box Board

Style – regular slotted containers – RSC. 125 to 275 P .S.I. bursting test, single wall or double wall B or C flute.
23-44 lbs. per inch of width Edge Crush Test (ECT).
4.11

Box Weight and Size Capacities

A. Box Weight, filled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support flaps.
B. Box Dimensions for 7000a and 7000a3 Machines: Inches [mm]
Length
Minimum 6" [152] 6.5" [165]*
Maximum N/A
* Boxes narrower than 10 inches [250mm] may require more frequent belt replacement
because of limited contact area.
3M-Matic 7000a-I / 7000a3-I Pro - Type 11700
™
Page 14
44-0009-2164-1 / ECO# 0078045
(continued)
A Standard Pos. B Alternate Pos.
Width AG 3 Tape Leg
(i.e. 2.75" [70])
4.5" [114]
26" [660] 28" [711]
Source Document for all related Manuals/Translations
Under Load
81,2db
3db
92,6db
3db
film tapes)
®
AG 3 Short T
(i.e. 2.0" [50])
1.5" [38]
25" [635]
Original Instruction
Idling
68 .0db
3db
79,4db
3db
C Fully Raised Pos.
LHB Tape Leg
(i.e. 1.38" [35])
12.25" [311]
35.5" [601]
International - ENG
February 2021