Theory Of Operation; Working Cycle Description; Running Mode Definition; Normal Stop Procedure - 3M -Matic 7000r-I Instructions And Parts List

8. Theory of Operation

8.1 Description of the Working Cycle
After having closed the top flaps of the
carton, the operator pushes it past the
box centering guides Proximity Sensor
and against the upper assembly raising
Proximity Sensor/Raising Actuator and
under top infeed end in order to avoid
the opening of the top flaps.
Further pushing causes the two top and
bottom belts to drive the box through
the taping heads which automatically
seal the top and bottom seams.
The carton is then expelled
(exit conveyor is optional)
8.2 Definition of Running Model
The case sealer 7000r-I / 7000r3-I Pro
has only one (automatic) operating mode:
- The EMERGENCY STOP BUTTON
unlocked (Figure 8-1)
- The Main Start Switch "ON"
(Figure 8-2)
- The Air Pressue "Start" is
pressed (Figure 8-3)

8.3.1 Normal Stop Procedure

The Push Button Station "Stop" is
pressed, the machine stops
immediately at any point of the
working cycle.

8.3.2 Emergency Stop

The LATCHING EMERGENCY
STOP BUTTON is located on the
top center of the machine
(Figure 8-4).
3M-Matic 7000r-I / 7000r3-I Pro - Type 11700
™
Page 32
44-0009-2165-8 / ECO# 0078045
Figure 8-1
Figure 8-2
Figure 8-3
Figure 8-4
Original Instructions
Source Document for all related Manuals/Translations
Air Pressure
"Start"
E-Stop Location
Belt
Direction
International - ENG
February 2021