VLS Error Messages
If any component of the VLS is not communicating correctly, a warning message will
appear on the front display.
A list of error messages in included on the following page. If the error you see is not
DGLF
on this list, please call
Customer Assistance.
In all cases, after removing the cause of the problem (or if you can't find a cause) push
MENU to return the VLS to the on-line condition.
f the error message is not listed, try to return to the on-line mode by pressing ALT
DGLF
and/or ENTER. If that does not work or if you get the error again, call
Customer Assistance and be prepared to tell them what the error message is – and
what the conditions are.
46
Troubleshooting and Diagnostics