Host Computer - ADIC VLS 4mm Installation And Operating Manual

2 cUd Qd ²"³ Q^T dXU b_R_dYSc cUd Qd ²#³
❐ Confirm that power is off and that you have a SCSI interface (either a separate
board as offered by
computer. Consult your computer manual.
DGLF
❐ Place the
❐ Connect the SCSI interface cable between the SCSI connectors on the computer
and the back of the VLS.
❐ Make sure there is a terminator installed on the last device of the SCSI chain.
x Quickstart
Note
DGLF
or integrated on the mother-board) installed in the host
VLS near the host computer to which it will be connected.
Terminator
SCSI
Interface
Cable

Host Computer