Sequential-Access Mode Configuration - ADIC VLS 4mm Installation And Operating Manual

DGLF
's VLS can also be used as a stacker in sequential-access mode if your software
does not support the random-access mode function.
Use UP or DOWN

Sequential-Access Mode Configuration

If you are using Sequential-Access Mode, this option lets you select which cassettes
the drive will write to, and whether or not you wish the drive to start again at the
beginning after the last cassette has been written to.
Use LEFT or RIGHT
of the First cassette you wish the VLS to insert into the drive. "L" is the number of the
Last cassette you wish the VLS to insert into the drive.
24 Equipment Description
Note
to select "random" or "sequential".
Note
Note
to select the item you wish to change. "F" is the number