Table of Contents
Advertisement
Library Error Messages
If any component of the VLS is not communicating
correctly, a warning message will appear on the front
display.
In all cases, after removing the cause of the problem (or if
you can't find a cause) push MENU to return the VLS DLT
to the On-Line Mode.
Most error messages are self-explanatory and give a good
indication of the problem. If the error message does not
clearly indicate what the problem may be, try to return to
the On-Line Mode by pressing ALT and/or ENTER. If that
does not work, or if the error message reappears, call the
ADIC Customer Assistance and be prepared to tell them
what the error message is – and what the conditions are (see
When You Call ADIC Customer Assistance later in this
chapter).
.
54
Troubleshooting and Diagnostics
Advertisement
Table of Contents
