Scsi Parity; Off-Line Time - ADIC VLS 4mm Installation And Operating Manual

SCSI Parity

Lets you enable or disable the reporting of SCSI parity. Press ENTER to access this
function.
Use UP or DOWN
to disable the reporting of parity check. Press ENTER to activate the change.

Off-Line Time

Lets you set the number of minutes the VLS will remain in the Off-Line mode. If
someone leaves the VLS in an Off-Line mode, after the pre-set number of minutes the
VLS will automatically return On-Line. This assures that your automatic backup will
be done even if the VLS has accidentally been left Off-Line.
Use UP or DOWN
Off-Line. Press ENTER to execute the change.
22 Equipment Description
to select "Y" to enable the reporting of parity check or "N"
Note
to select the number of minutes you wish the VLS to remain
Note