Rear Panel Switches And Connectors; Menu Items - ADIC VLS 4mm Installation And Operating Manual

Rear Panel Switches and Connectors

Switches and connectors on the rear of the VLS are shown in Figure 7.
SC SI I/O
C onnectors
Fan Filter
R ear
A ccess Panel
A C P ow er Connector
and Pow er Sw itch
Power Switch
AC Power Connector
SCSI I/O Connectors

Menu Items

The menus and mode shown at the top of the following diagram are selections
available from the Main Menu. When you choose one of the Main Menu items, a set
of options appears; these options are listed below the Main Menu selections. If an
option has sub-options, these sub-options are listed below and to the right of the
option.
18 Equipment Description
Figure 7. Back of ADIC VLS
Turns on the AC power to the VLS.
Plug the VLS AC power cord into this connector.
Connections for the interface cable which connects the
VLS to the computer, to other VLS units and/or to other
devices on the SCSI channel.