Table of Contents
Advertisement
Z-WAVE DEVICES
Z-WAVE DEVICES
Z-Wave Devices
Add, Edit, Clear and Remove Z-Wave Devices. You can also View/Edit associations as well as access Z-
Wave Settings.
Add Device (Inclusion)
Add new devices to the
Z-Wave network
Edit Device
Make changes to existing
devices
Clear Device (Exclusion)
Removes a Z-Wave device
from its previous network.
Also deletes a device from
the IQ4 Hub if currently
paired.
Delete Failed Device
Remove a failed Z-Wave device
from the IQ4 Hub' s memory
Remove All Devices (Factory
Default Reset)
If this controller is the primary
controller for your network,
resetting it will result in the nodes
in your network being orphaned
and it will be necessary after the
reset to exclude and re-include all
of the nodes in the network. If
this controller is being used as a
secondary controller in the
network, use this procedure to
reset this controller only in the
event that the network primary
controller is missing or otherwise
inoperable.
Note: Not authorized for EN Grade 2 installations
View/Edit Associations
Manually change Z-Wave
associations for specific
devices.
Z-Wave Settings
Configure device limits and
other Z-Wave settings.
SmartStart
Enter the device' s DSK.
Provisioning List
Devices added via
SmartStart will show their
progress of being included
into the network.
Advertisement
Table of Contents
