Table of Contents
Advertisement
SYSTEM TESTS
DUAL PATH TEST
When enabled, dual path connectivity allows the IQ4 Hub to use both cellular
and Wi-Fi radios for signals and communication simultaneously.
NOTE: The IQ4 Hub must be connected to a Wi-Fi network to enable Dual Path
NOTE: IQ4 Hub is compatible with the following UL/ULC listed monitoring station receivers: SG-System I/II/III/IV/
5. Wi-Fi is for supplemental use only for UL/cUL
By default Dual-Path Control is
enabled. To disable, "un-check"
the box.
You can also run a Dual-Path Wi-
Fi test to ensure that the Dual
Path is connecting properly.
Unlike the standard Wi-Fi test
(which checks connection to the
router) the panel will check the
broadband connection to
Alarm.com.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
131
OF
197
FIND IT
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
SYSTEM TESTS
DUAL PATH TEST
Advertisement
Table of Contents
