Table of Contents
Advertisement
MAINTENANCE
UPGRADE SOFTWARE USING ACCESS POINT
Most updates are downloaded over Wi-Fi, but in the event that Wi-Fi is not present at the
installation site, a Panel can be updated with files transferred from a local device (phone,
tablet, computer, etc) via the built-in Panel Access Point.
To perform a software update using the Panel Access Point follow the steps below:
1- Download the needed software update files from the Dealer Portal to your device (phone,
tablet, computer).
2- Go to Settings/Advanced Settings/Upgrade Software then touch "Upgrade Using Access
Point".
3- Scan the QR Code with your phone
camera or manually connect to the Panel
AP with the SSID and Password shown on
the screen.
4- Press "Start" to begin the local server
session, then from your device scan the
second QR code or navigate to the "https"
site shown on the Panel screen.
5- Follow the prompts on your device
screen to select the correct files and transfer them to the Panel.
FIND IT
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
UPGRADE SOFTWARE
NOTE: For UL/cUL or EN Grade
2 installations the remote
software feature shall not be
used and the panel shall not be
setup to remotely upgrade.
Advertisement
Table of Contents
