QOLSYS IQ4 Hub Installation Manual page 48

PROGRAMMING
SOUND
Setting
Z-Wave Device Voice
Prompts
Z-Wave Remote Voice
Prompts
All Chimes
Sensor Chimes
Panel
Activity Sensor
Default
Enabled Turns Z-Wave Device voices on (enabled) or off (disabled)
Turns voices on (enabled) or off (disabled) for Z-Wave devices being
Enabled
controlled remotely (via Alarm.com)
Chime Settings
This is a global setting for Sensors, Panel messages and Activity
Enabled Monitoring Sensors chimes and indicates whether the panel should
emit tones or "beeps"
Enabled Turns chimes on (enabled) or off (disabled) for Sensors
Enabled Turns Panel chimes on (enabled) or off (disabled)
Enabled Turns Activity Sensor chimes on (enabled) or off (disabled)
QOLSYS CONFIDENTIAL AND PROPRIETARY
Description
PAGE 48 OF 197
FIND IT
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
SOUND